Charging station for electric vehicle KS SLC

- 30%

259.00 

 

Rated voltage, V
230/400
Display 1.3-inch OLED screen
CT’s hole diameter, mm 16
Current detection, A
0~ 100
Communication PLC (Power Line Communication)
Matching quantity
≤3
Installation location
Indoor
Altitude, mm
≤ 2000
Käyttölämpötila, °C
-20…+55
Kosteus
≤ 95%RH, without condensation
Sisämitat (PxLxK), mm
76x89x76
Nettopaino, kg
< 0.5
Suojausluokka
IP00
EAN-koodi
4260405366415

Koottu PRC.

 

TOIMITUS 14 TYÖPÄIVÄÄ

SKU KSSLC Osastot ,

We recommend using the KS SLC smart load controller from Könner & Söhnen® to protect the grid from overloading during peak electricity consumption hours when multiple power consumers other than the charging station are connected to the grid at the same time.

This device monitors the total current input to the grid online, and if the total input current exceeds the permissible limit while charging your vehicle, the KS SLC smart load controller will automatically reduce the output current of the EV charging station to ensure stable operation of your household appliances. Now that the power consumption of your household appliances has decreased, your electric vehicle will start charging again in normal mode, i.e. the charging output current for the electric vehicle will increase again automatically.

 

CURRENT SENSORS

Smart load controller KS SLC chose an CT (current transformer) as the current sensor, which has the advantage of open and close installation, convenient and fast wiring. One Smart load controller KS SLC is equipped with 3 open type CTs for total input current detection.

Lähetä tuotepyyntö