Diesel generator KS 9100HDE-1/3 ATSR (EURO V)

1639.00 

WATCH THE VIDEOS
Diesel generators Könner&Söhnen®
Which generator power to choose?
Who can find Könner & Söhnen generators useful?
Commissioning of a diesel generator
Manual start of diesel generator
Electric start of diesel generator

1639.00 

Voltage
230/400
Max/Nominal power (230V), kW
6.5/6.0
Max/Nominaalne võimsus (400V), kW
7.5/7.0
Frequency, Hz
50
Vool (max.) 230/400 V, A
28.26/13.54
Outlets
1 x CEE 230 V 32 A
1 x CEE 400 V 16 A
Avg. working time (power 50%), h***
6.1
LED display
Voltage, frequency, working hours
Noise level Lpa (7m)/Lwa, dB
71/96
Power output DC, V/А
12/8.3
Engine type
Diesel powered one-cylinder, four-stroke air-cooled
Engine model
KS 520HD-V
Engine power, hp/kW
18.0/13.24
Preheater
Fuel tank volume, l
11
Crank case volume, L
1.65
Engine cylinder volume, cm3
498
Power output controller
Intelligent voltage stabilization system AVR
Engine start
Manual/electric
Frame diameter
32 mm, round
Accumulator, A·h
30
Output for ATS
Protection class
IP23M
Net dimensions (LxWxH), mm 730×495×630
Gross dimensions (LxWxH), mm 750×520×660
Net weight, kg 122
Gross weight, kg 130
EAN code 4260405362288

Assembled in PRC.

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.

DELIVERY 10 WORKING DAYS

SKU KS9100HDE13ATSR Categories ,

 

KÖNNER & SÖHNEN ENGINES

Engines for both diesel and gasoline generators are manufactured under the license of DIMAX Int. GmbH and are marked with K&S logo. High power of engines in relation to the alternator allows to receive the declared power output and maintain stable work at any load. All engines are tested for continuous operation, and then disassembled and examined for trouble-shooting purposes. Each engine and each generator have an individual serial number, which allows us to control the quality of production and service. The engines meet all European quality standards, including the latest EURO V emission standards.

AUTOMATIC TRANSFER SWITCH

The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.

Increased engine resource INCREASED ENGINE RESOURCE

Könner & Söhnen® diesel generators of the “HEAVY DUTY” series have an increased motor resource – so they have a longer service life, can work for more hours without a break. The engine resource exceeds 3000 working hours, this is confirmed by multi-hour, multi-level tests and warranty. To show high performance, machines should be maintained properly.

Preheater function PREHEATER FUNCTION

All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.

ERGONOMIC CONTROL PANEL

Generator’s ergonomic control panel allows you to easily control its operation due to the convenient functions location: a modern LED display (counter hours, frequency, voltage), electric start, emergency (circuit breaker) switch, low oil level sensor, outlets, terminals and more.

AVR AVR

“Könner & Söhnen” series diesel generators are equipped with intelligent voltage stabilization system AVR. It allows to keep the voltage at a constant value of 230 V and protects against unwanted short circuits.

Enforced frame ENFORCED FRAME

Additional frame reinforcement with the upper protective strips allows HEAVY DUTY professional series generators to operate in a more rigid mode. The reinforced frame structure protects the tank against damage during operation and transportation.

Dampers to lower vibration DAMPERS TO LOWER VIBRATION

All models of the Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working generator will not damage the floor covering, and the frame coating will not be scratched.

ACCESSORIES SET

Generator is equipped with additional accessories: a portable 2P+PE 16A 230V power plug, a portable 2P+E 230V 32A power plug, a 8x10mm hook key, 12x14mm and 17x19mm keyholes and a two way 6.0mm PH2 screwdriver.

 

***Fuel consumption depends on many factors: load, fuel quality, season, altitude and generator technical condition.

Send a product request