2 cylinder diesel generator KS 13-2DEW 1/3 ATSR

Max power (400V), kVA 11.25
Nominal power (400V), kVA 10.63
Max/Nominal power (230V), kW 8.1/7.7
Max/Nominal power (400V), kVA 11.25/10.63
Frequency, Hz 50
Vool (max.) 230/400 V, A
Outlets 1 x Schuko 230 V
1 x CEE 230 V 32 A
1 x CEE 400 V 16 A
1 x CEE 400 V 32 A
Contact strip
Avg. working time (power 50%), h*** 11.4
Control panel Multifunctional digital controller SmartGen
Noise level Lpa (7m)/Lwa, dB 67/92
Power output DC, V/А
Engine type Diesel powered V-twin water-cooled two-cylinder, four-stroke
Engine model KS 820HD
Engine power, hp/kW 18/13.24
Preheater +
Fuel tank volume, l 25
Crank case volume, L 3.3
Coolant volume, l 3.5
Engine cylinder volume, cm3 794
Power output controller Intelligent voltage stabilization system AVR
Engine start Electric
Accumulator, A·h 45
Output for ATS +
Net dimensions (LxWxH), mm 1250x650x760
Gross dimensions (LxWxH), mm 1300x700x880
Net weight, kg 310
Gross weight, kg 345
Protection class IP23M
EAN code 4260405363186

*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.

Assembled in PRC.


SKU KS132DEW13ATSR Categories ,

The generators of this series are developed on the basis of modern heavy-duty two-cylinder watercooled engines (18 hp), increased service life (more than 3000 operating hours). Models KS 13 diesel generators from TM Könner & Söhnen feature a unique VTS phase switching system suitable for singlephase (230V) or three-phase (400V) operation with almost no loss of power. Mini-power plants have two design types: exposed, equipped with LED-display (voltage, frequency, working hours) and enclosed in a soundproof anti-vandal housing with a multifunctional controller and remote control.

All generators of this series are suitable for connecting the АТS (automatic transfer switch) system and equipped with an automatic monitoring system for all key indicators of the operating status: overload protection, automatic engine stop at low oil level, fuel level sensor. HEAVY DUTY series generators are intended for use not only as a backup power source, but also for continuous operation.



High-performance optimally balanced V-twin water-cooled two-cylinders four-stroke engine (18 hp), which ensures reduced vibration of the generator during operation and it has the enlarged motor resource.


All-season, noise-absorbing, vandal-proof casing provides effective protection of the generator and prolongs its service life. The casing is equipped with handles and transport wheels for easy movement.


The user-friendly ergonomic control panel allows easy control of the whole device, requires no special skills, and is equipped with sockets designed for removal of full power delivered by the generator.


  1. Digital display shows operating voltage of generator
  2. Power display
  3. Multifunction display shows the current, frequency, battery voltage, total operating hours (maximum 999 hours), engine and generator temperature. The controller also protects the engine from over- and undervoltage, under- and overfrequency, overload and overtemperature shown on the multifunction display.
  4. Function switching buttons – the parameters displayed can be adjusted by pressing the touch buttons (UP, DOWN, LEFT, RIGHT)
  5. The indicator shows low oil pressure, when it appears – the engine will be turned off immediately

High-performance two-cylinder diesel generators from TM Könner & Söhnen are equipped with top-notch contact strips for connecting electrical cables, which allows removing the full power delivered by the unit.


The generator is suitable for connecting the ATS (Automatic Transfer Switch) system. The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.

Preheater function


All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.


Universal generators 2 in 1 have a unique VTS (voltage Transfer Switch) phase switching system, which allows using a single generator both in single-phase mode (230V) and in three-phase mode (400V) with almost no loss of power. Each mode has its own circuit breaker. There is no need to use two separate generators.

***Fuel consumption depends on many factors: load, fuel quality, season, altitude and generator technical condition.

Send a product request